Stainless Steel Screw Slat Belt

Ajax-Gutteridge-stainless-steel-screw-conveyor

Ajax-Gutteridge-stainless-steel-screw-conveyor. This unit has an overall length of 2700 mmand a trough length of 2600 mm the " U " trough is 160 mm wide with a 150 mm screw on a 160 pitch. This unit is driven via a 2.2kw FLP motor through a reduction gearbox. It has outboard bearings fitted. The unit is fully lidded and has a 460 x 160 inlet and a 450 dia. connection for a hopper.The outlet is 160 x 160 and the centres are 2100 mm.

Gutteridge-stainless-steel-auger-screw-conveyor

Gutteridge-stainless-steel-auger-screw-conveyor. A 230 mm " U " trough conveyor which can be horizontal or at an angle of approx. 45 deg. as it has special lids which make it a cylindrical conveyor. The unit has a 200 mm s/s screw with a 100 mm pitch for 600 mm then a 190 mm pitch for 2220 mm. This unit is 3403 mm overall and 2850 mm screw length with 2505 mm inlet and outlet centres. The unit has a 203 x 306 inlet and a 203 x 203 outlet. Put into it's angled form it has a 1605 mm discharge height with two support feet for this at 2220 mm centres. The conveyor has a 1.5 kw drive motor which goes through a reduction gearbox giving a scroll speed of approx. 81 rpm.

Horizontal flat belt conveyor.

Horizontal flat belt conveyor. Approx. 1040 mm long x 330 mm wide x 700 mm high. The unit is Ex. Food production. A rubber flat belt with a rough finish for grip. The unit stands on stainless steel legs and frame with adjustable feet. It is driven by a single phase drive with an invertor to alter the belt speed. The belt also has a tensioner.

Stainless steel vertical powder elevator.

Stainless steel vertical powder elevator. Lift is 2240 mm via a 100 mm screw. The hopper is approx. 740 wide x 1200 long x 800 to the top of the screw. Ex. food production. This all stainless steel vertical auger also incororates a stainless steel powder hopper with a 100 mm horizontal screw feeding the vertical screw. The hopper has within it a stainless steel grille. The bottom auger is driven by a Leroy-Somner geared drive 0.55 kw @ 1450 rpm witha ratio of 33.1 The vertical screw is top driven by a 1.5 kw motor via a chain and sprocket.

Therco Stainless steel crevis free screw conveyor

Therco Stainless steel crevis free screw conveyor Therco high polished conveyor last used on food products. A U-Trough conveyor approx 1660 long x 190 mm wide with a 150 mm screw at a 75 mm pitch , for the first 865 mm and then 300 mm pitch to the 250 mm x 250 mm flanged outlet which is 150 mm x 150 mm intern measurement.The unit has a 610 mm x 180 mm inlet and one lidded section510 mm x 180 mm the overall length is approx 1830 mm and has out board bearings. The unit is driven by a 0.75 kw 1450 rpm motor through a reduction gearbox giving a output speed of 64 rpm.

Rospen stainless steel screw feeder

Rospen stainless steel screw feeder Made by Rospen in 2000. The unit is mounted on a baseplate and has two geared drives. Drive one is for the main 50 mm feed screw the other is for a lump breaker. This unit comes with a stainless steel approx 200 Lts hopper. The drive motors are new and unused.