Rope and Disc Bucket Vacuum Linnier

Entecon-stainless-steel-rope-disc-conveyor

Entecon-stainless-steel-rope-disc-conveyor. The unit is 6100 long centre to centre. At present it is orientated to discharge at 3000 mm but it can work in the vertical at 6100 mm. The unit has s/s wire with polyprop discs. The conveyor tubes are 75 mm dia. The unit has a 150 mm dia inlet and a 200 mm dia outlet. The drive is a flp 2.2 kw 1420 rpm motor through pulleys and belts. Very good condition. For chemical use only.

Morgenson-Stainless-Steel-Tubular-Linnier-Conveyor

Morgenson-Stainless-Steel-Tubular-Linnier-Conveyor. Made in 2007. Serial Number C074262. 400 mm Dia. x 2140 Long with two side mounted vibratory motors.

Ajax-Invictor-Vibro-Linnier-Stainless-Steel-Conveyor

Ajax-Invictor-Vibro-Linnier-Stainless-Steel-Conveyor. A stainless steel vibrating horizontal conveyor approx. 4 meters long and 260 mm wide by 130 mm deep fully enclosed. Both inlet and outlet are 250 mm dia. 3700 mm centres. The unit is mounted to a mild steel frame and is supported on four springs. This unit is driven by two Invictor vibration motors.

Vac-U-Max vacuum conveyor

Vac-U-Max vacuum conveyor A stainless steel conveyor with a 7.6 Lts single venturi feed hopper. These units work on a timed cycle , they will deposit 7.6 Lts of powder every 30 secs through a 100 mm dump valve. Each unit has it's own air pump built in filter and shaker and stainless steel viro-feed conveyor each is mounted in a mild steel frame.