Guisti-stainless-steel-mixing-vessel. A food quaility vertical all stainless steel mixing vessel. Approx. 530 Dia. x 730 deep on the straight wall, the unit has a convex fully draining sloping bottom ending with a 25 mm side outlet, the slope is 30 mm from 730 -760 mm. This unit has a 0.37 kw 1420 rpm motor bolted to the vessel and drives a s/s agitator shaft 20 mm x 700 long with a 150 three blade prop. The open top has a full grille fitted. The unit stands on three s/s tubular legs 40 mm dia and give a ground clearence of 340 mm. Serial No. RJ9611 Made in 1984.
A.P.V. 250 Lts Insulated Stainless Steel Mixing Tank Food quality enclosed mixing vessel with a flat sloping bottom fully draining with 180 mm fall from back to front. Approx. 790 mm I/D plus 100 mm for insulation and cladding x 530 mm on the straight and standing on three s/s legs giving a ground clearance of 300 mm to the bottom side outlet. Top connections are 1 x 410 mm hatch with hinged lid 1 x 100 mm vent 2 x 32 mm 1 x 25 mm spray ball 1 x 250 mm centre which holds the agitator. An offset bolt on agitator with a two speed motor 1.1 kw / 0.75 kw 1450 / 940 rpm through a reduction gearbox giving a shaft speed of 282 / 188 rpm. A s/ 25 mm shaft and a 230 mm dia s/s impeller.
Bibby and Co stainless steel jacketed mixing tank A vertical 316 stainless steel mixing tank with a stainless steel jacket. The unit has four off stainless steel tubular legs giving a ground clearence of 700 mm. Dims are approx. 1380 mm int. dia. x 1530 mm on the straight with 250 mm dishes. Connections. The top dish has 1 x 450 mm manway with hinged cover, 1 x 100 mm 1 x 75 mm , 3 x 50 mm 1 x 25 mm CIP spray ball, and 1 x 125 mm sight glass. The bottom dish has a 50 mm centre outlet. This vessel is atmospheric, The jacket is rated @ 40 psi working and 67 psi test. Last used on cosmetics. The unit also has a Lightnin air agitator c/w stainless shaft and impeller.
Stainless steel 600 Lts jacketed mixing tank A stainless steel vertical atmospheric vessel with a limpit coil jacket on the side wall. This unit has a flat sloping bottomwhich is fully draining.The vessel is lagged and cladd with stainless steel cladding. Approx. 810 mm dia x 900 mm deep and stands on three stainless steel tubular legs. The unit has a stainless bridge for a centre agitator and a stainless steel lid of which a third is hinged. Connections are 1 x 25 mm in the lid 1 x 160 mm centre flange for agitator, 2 x 50 mm outlets.
Stainless steel 300 Lts Jacketed Mixing Vessel A stainless steel mixing vessel with a stainless steel limpit coil jacket. This unit has a Greaves geared agitator which is centre mounted the shaft is stainless steel and has a three blade prop type impeller 200 mm dia.The unit has four x 40 mm inlets in the lid. This vessel is atmospheric. Approx 700 mm dia x 560 mm deep with a 150 mm bottom dish which has a 40 mm outlet. The jacjet is rated at 120 psi working 180 test.
450 Lts Stainless Steel Mixing Vessel Stainless steel sigle skin mixing vessel with a Greaves gate agitator driven by a motor and Radicon gearbox. An atmospheric vessel withstainless steel lids which is a third hinged. Approx 915mm dia by 635mm deep with a 200mm bottom dish complete with a 50mm outlet operated by a air valve. The unit is on four stainless tubulat legs.